SW-15

SW-15

MACHINE DESCRIPTION

The Model SW-15 Bar Soap Stretch Wrapper is designed to wrap with stretch film all banded, bandless and specialty shaped soaps.
The Operator feeds the stamped soaps directly into the stretching station.
The stretch film is fed from reel. A square shaped film of 300 x 300 mm is cut from the reel and  is moved under the soap  by a cam operated mechanism.
The soap and the wrapping film are lowered into the wrapping head. During the transfer the film is pre-stretched.
The wrapping head, with the soap inside, stretches the film around the soap using an iris.
A hot knife cuts the film and seals it. Two fingers hold, transfer and discharge the excess film in a tube connected with air ejector.
An automatic labeller applies roll fed self-adhesive labels, on top of each soaps.
The wrapped, sealed and labelled soaps are discharged onto an independent driven discharge conveyor.

ELECTRICAL AND SAFETY FEATURES

• The SW-15 is a mechanical unit with cam operated mechanisms.
• All contact parts with the soap are made of special rubber or stainless steel.
• Safety guards panels with electronic safety interlocks.
• Discharge conveyor for wrapped and labelled product.
• Excess stretch film collecting container.
• Prewired electrical controls and operator panel according to I.E.C standards.
• PLC, encoder, programmer and Guerzè operator with diagnostic screen.

SPECIFICATIONS

Operating Speed : up to 15 wraps per minute depending on soap shape and size and operator’s skill.

Soap Dimensions (mm) Minimum Maximum

– Length : 40 110
– Width : 25 80
– Thickness : 10 60
– Diameter : 30 90

Stretch Film Reel Size (mm)

– Maximum reel diameter : 250
– Roll width : from 200 to 300
– Core diameter : 76 (3 inches)

Label Reel Size (mm)

– Maximum reel diameter : 250
– Roll width : from 15 to 65
– Core diameter : 45

Label Dimensions (mm)
– Maximum diameter : 62
– Maximum diagonal : 62

Installed Power : 3 kW
Electrics: : Standard 380V – 50 Hz (or as p. your specifications)
Air Consumption : 250 Nl/min at 6 bar pressure

SW-25

SW-25

MACHINE DESCRIPTION

The Model SW-25 Bar Soap Stretch Wrapper is designed to wrap with stretch film all banded, bandless and specialty shaped soaps.
The Operator or the Automatic Soap Transfer model AF-25, quoted as option, feeds the stamped soaps into an indexing rotary motion soap infeed table, one soaps at a time.
The stretch film is fed from reel. A square shaped film of 300 x 300 mm is cut from the reel and  is moved under the soap  by a cam operated mechanism.
The soap and the wrapping film are lowered into the wrapping head. During the transfer the film is pre-stretched.
The wrapping head, with the soap inside, stretches the film around the soap using an iris.
A hot knife cuts the film and seals it. Two fingers hold, transfer and discharge the excess film in a tube connected with air ejector.
An automatic labeller applies roll fed self-adhesive labels, on top of each soaps.
The wrapped, sealed and labelled soaps are discharged onto an independent driven discharge conveyor.

ELECTRICAL AND SAFETY FEATURES

• The SW-25 is a mechanical unit with cam operated mechanisms.
• All contact parts with the soap are made of special rubber or stainless steel.
• Safety guards panels with electronic safety interlocks.
• Discharge conveyor for wrapped and labelled product.
• Excess stretch film collecting container.
• The indexing rotary soap infeed table has removable rubber pockets according to the shape of the soap. This feature allows for quick and easy changeover from one size to another, in about 10 minutes.
• Prewired electrical controls and operator panel according to I.E.C standards.
• PLC, encoder, programmer and Guerzè operator with diagnostic screen.

SPECIFICATIONS

Operating Speed : up to 25 wraps per minute depending on soap shape and size

Soap Dimensions (mm) Minimum Maximum
– Length : 40 110
– Width : 25 80
– Thickness : 10 60
– Diameter : 30 90

Stretch Film Reel Size (mm)
– Maximum reel diameter : 250
– Roll width : from 200 to 300
– Core diameter : 76 (3 inches)

Label Reel Size (mm)
– Maximum reel diameter : 250
– Roll width : from 15 to 65
– Core diameter : 45

Label Dimensions (mm)
– Maximum diameter : 62
– Maximum diagonal : 62

Installed Power : 3 kW
Electrics: : Standard 380V – 50 Hz (or as p. your specifications)
Air Consumption : 375 Nl/min at 6 bar pressure

SW-35

SW-35

MACHINE DESCRIPTION

The Model SW-35 Bar Soap Stretch Wrapper is designed to wrap with stretch film all banded, bandless and specialty shaped soaps.
The Operator or the Automatic Soap Transfer model AF-35, quoted as option, feeds the stamped soaps into an indexing rotary motion soap infeed table, one soaps at a time.
The stretch film is fed from reel. A square shaped film of 300 x 300 mm is cut from the reel and  is moved under the soap  by a cam operated mechanism.
The soap and the wrapping film are lowered into the wrapping head. During the transfer the film is pre-stretched.
The wrapping head, with the soap inside, stretches the film around the soap using an iris.
A hot knife cuts the film and seals it. Two fingers hold, transfer and discharge the excess film in a tube connected with air ejector.
An automatic labeller applies roll fed self-adhesive labels, on top of each soaps.
The wrapped, sealed and labelled soaps are discharged onto an independent driven discharge conveyor.

ELECTRICAL AND SAFETY FEATURES

• The SW-35 is a mechanical unit with cam operated mechanisms.
• All contact parts with the soap are made of special rubber or stainless steel.
• Safety guards panels with electronic safety interlocks.
• Discharge conveyor for wrapped and labelled product.
• Excess stretch film collecting container.
• The indexing rotary soap infeed table has removable rubber pockets according to the shape of the soap. This feature allows for quick and easy changeover from one size to another, in about 10 minutes.
• Prewired electrical controls and operator panel according to I.E.C standards.
• PLC, encoder, programmer with diagnostic screen.

SPECIFICATIONS

Operating Speed : up to 50 wraps per minute depending on soap shape and size

Soap Dimensions (mm) Minimum Maximum
– Length : 40 110
– Width : 25 80
– Thickness : 10 60
– Diameter : 30 90

Stretch Film Reel Size (mm)
– Maximum reel diameter : 250
– Roll width : from 200 to 300
– Core diameter : 76 (3 inches)

Label Reel Size (mm)
– Maximum reel diameter : 250
– Roll width : from 15 to 65
– Core diameter : 45

Label Dimensions (mm)
– Maximum diameter : 62
– Maximum diagonal : 62

Installed Power : 3 kW
Electrics: : Standard 380V – 50 Hz (or as p. your specifications)
Air Consumption : 375 Nl/min at 6 bar pressure

SW-50

SW-50

MACHINE DESCRIPTION

The Model SW-50 Bar Soap Stretch Wrapper is designed to wrap with stretch film all banded, bandless and specialty shaped soaps.
The Operator or the Automatic Soap Transfer model AF-50, quoted as option, feeds the stamped soaps into an indexing rotary motion soap infeed table, one soaps at a time.
The stretch film is fed from reel.
For reaching the speed of 50 pieces per minute, the unit has been equipped with two heads feeded by two film reels one per each head. A square shaped film of 300 x 300 mm is cut from the reel and it is moved with cam operated mechanism under the soap.
The soaps and the wrapping film are lowered into each wrapping head.
During the transfer the film is stretched.
Each  wrapping head, with the soap inside, stretches the film around the top of the soap by using an iris.
A hot knife cut and seal the film while two fingers hold, transfer and discharge the excess film into a tube with air ejector.
An automatic labeller applies roll fed self-adhesive labels, on top of each soaps.
The wrapped, sealed and labelled soaps are discharged onto two independent driven discharge conveyors.

ELECTRICAL AND SAFETY FEATURES

• The SW-50 is a mechanical unit with cam operated mechanisms.
• All contact parts with the soap are made of special rubber or stainless steel.
• Safety guards panels with electronic safety interlocks.
• Discharge conveyor for wrapped and labelled product.
• Excess stretch film collecting container.
• The indexing rotary soap infeed table has removable rubber pockets according to the shape of the soap. This feature allows for quick and easy changeover from one size to another, in about 10 minutes.
• Prewired electrical controls and operator panel according to I.E.C standards.
• PLC, encoder, programmer with diagnostic screen.

SPECIFICATIONS

Operating Speed : up to 50 wraps per minute depending on soap shape and size

Soap Dimensions (mm) Minimum Maximum

– Length : 40 110
– Width : 25 80
– Thickness : 10 60
– Diameter : 30 90

Stretch Film Reel Size (mm)

– Maximum reel diameter : 250
– Roll width : from 200 to 300
– Core diameter : 76 (3 inches)

Label Reel Size (mm)

– Maximum reel diameter : 250
– Roll width : from 15 to 65
– Core diameter : 45

Label Dimensions (mm)

– Maximum diameter : 62
– Maximum diagonal : 62

Installed Power : 4 kW
Electrics: : Standatrd 380V – 50 Hz (or as p. your specifications)
Air Consumption : 750 Nl/min at 6 bar pressure

SW-75

SW-75

MACHINE DESCRIPTION

The Model SW-75 Bar Soap Stretch Wrapper is designed to wrap with stretch film all banded, bandless and specialty shaped soaps.
The Operator or the Automatic Soap Transfer model AF-75, quoted as option, feeds the stamped soaps into an indexing rotary motion soap infeed table, one soaps at a time.
The stretch film is fed from reel.
For reaching the speed of 50 pieces per minute, the unit has been equipped with two heads feeded by two film reels one per each head. A square shaped film of 300 x 300 mm is cut from the reel and it is moved with cam operated mechanism under the soap.
The soaps and the wrapping film are lowered into each wrapping head.
During the transfer the film is stretched.
Each  wrapping head, with the soap inside, stretches the film around the top of the soap by using an iris.
A hot knife cut and seal the film while two fingers hold, transfer and discharge the excess film into a tube with air ejector.
An automatic labeller applies roll fed self-adhesive labels, on top of each soaps.
The wrapped, sealed and labelled soaps are discharged onto two independent driven discharge conveyors.

FEATURES

• The SW-75 is a mechanical unit with cam operated mechanisms.
• All contact parts with the soap and side panels are made of silicon rubber or stainless steel.
• Plexiglas top and side covers with magnetic safety interlocks.
• The indexing rotary soap infeed table has removable pockets according to the shape of the soap. This feature allows for quick and easy changeover from one size to another, in about 10 minutes.
• Prewired electrical controls and operator panel according to I.E.C. standards.
• PLC, encoder, with diagnostic control panel.

SPECIFICATIONS

Speed : up to 75 wraps per minute depending on the shape and size of the soap.
Soap dimensions (mm) Minimum Maximum
• Length : 40 110
• Width : 25 80
• Thickness : 10 60
• Diameter : 30 90
(The three maximum dimensions are not possible together)
Label Dimensions (mm)
• Maximum diameter : 62
• Maximum diagonal : 62
Stretch film reel size (mm)
• Maximum reel diameter : 250
• Roll width : 200 to 300
• Core diameter : 76 (3”)
Automatic labeler (mm)
• Maximum reel diameter : 250
• Reel width : 15 to 65
• Core diameter : 45
Installed power : 4 kW
Electrics : Standard 380V-50Hz – or as per your specifications
Air consumption : 900 Nl/minute at 6 bar pressure

TWM

TWM

MACHINE PRESENTATION

Guerzè & Co took the decision to put into production a mechanical bar soap wrapping machine able to double-wrap (outer plus stiffener) both big toilet soap tablets and laundry ones; this was the consequence of the growing requests from the soap market for an high quality product but also economical, user friendly and easy to clean and easy in its maintenance.
Using its vast experience in the packaging field, our Company decided to follow the road towards simplification.
TWM is almost electronic-free, very sturdy and compact.
It’s very versatile, given the possibility to wrap soap tablets up to 300 grs in weight.
With its easy and unique wrapping system, the TWM produces a very tight double point-end fold style wrap.
Commercially speaking the new mechanical bar soap wrapper is very competitive: with a cheap price and simplicity it’s the ideal choice both for little to medium sized productions. Thanks to its 100 ÷ 140 pieces per minute productivity, the TWM is the ideal for soap bar plants with capacity up to two tonnes per hour.
Technically the mechanical bar soap wrapper can be equipped both with traditional wrapping system (paper outer warp plus carton inner wrap) or with welding of BOPP.
Since Guerzè & Co’s purpose was to reduce the final price, the print registration for the outer wrap device is an option.

FEATURES

The basic machine is supplied complete with the following components:
– One reel holder for outer wrap and inner wrap (stiffener);
– One set of change parts (soap details to be specified in the purchase order);
– Bottom and side sealing with individual temperature controllers;
– PLC and operator touch panel;
– Quick and easy (less than 30 minutes) size changeover with minimum size part requirements, no adjustments needed.

SAFETY SYSTEM

– No soap / no paper device;
– Overload protection;
– Plexiglas safety guards;
– According to IEC and CE Standards.

SPECIFICATIONS

Production speed : up to 100 ÷ 140 soaps per minute (depending on the soap and paper material and quality)

Soap dimensions (mm) Minimum Maximum
– Length : 35 150
– Width : 45 75
– Thickness : 6 50
– Weight : 10 grs 300 grs

Outer wrap (mm)
– Max roll diameter : 450
– Core diameter : 75

Inner wrap (stiffener) (mm)
– Max roll diameter : 620
– Core diameter : 150

Installed power : 6 kW
Electrical tension : Standard 380V T – 50 Hz OR as per customer’s request
Machine colour : Beige RAL 7032. All contacts parts with the product are made in stainless steel AISI 304.