TW

TW

MACHINE DESCRIPTION

The TW is a versatile multipurpose bar soap wrapping machine designed to wrap standard and hotel size soaps. The outerwrap  is heatsealable and the print could be registered or non-registered.
The TW with anunique, simple rotating folder wrapping system produces a very tight double point-end fold style wrap.
For rectangular banded shape soaps, the infeed system is a simple flat belt.
The machine could be equipped, as option, with a Pick and Place Turret with four suction cups in conjunction with a Pocketed Infeed Timing Belt for Oval shaped banded and bandless shaped bars.
Also a wrapping and sealing device for BOPP is available as option.

FEATURES

The basic machine is supplied complete with the following components:
– 90° bar soap transfer infeed group from infeed belt to the rotating folder ( tumbler).
– One reel holder for heatsealable unregistered printed outerwrap.
– One reel holder for innerwrap (stiffener) – required for bandless soap wrapping.
– One set of change parts (soap details to be specified in the purchase order).
– Bottom and side sealing with individual temperature controllers.
– Variable Frequency Drive with “soft start” feature.
– Outerwrap feed controlled by a “brushless” DC drives.
– PLC and Operator Touch Panel
– Wrapped product discharge with driven side belts.
– Manual centralized lubrication system.
– Quick and easy 30 minutes size changeover with minimum size part requirements.
– Manual jog for machine adjustment.
– Statistics of all the alarms and machine stops

SAFETY SYSTEM

No soap / no paper device
Machine stops if jam occurs at the exit
Both outerwrap and innerwrap end of roll alarm with machine stop
Overload protection
Electronically interlocked Plexiglas safety guards
According to IEC and CE Standards

SPECIFICATIONS

Speed : up to 200-220 soaps per minute, depending on the soap and paper material.
Soap dimensions (mm) : Minimum Maximum
• Length : 55 105
• Width : 35 65
• Thickness : 12 36
Outerwrap (mm):
• Maximum roll diameter : 250
• Maximum roll width : 150
• Core diameter : 75 mm (3”) – 150 mm (6”)
Innerwrap (stiffener) (mm):
• Maximum roll diameter : 620
• Maximum roll width : 135
• Core diameter : 150 mm (6”)

Installed power : 8 Kw
Noise level : less than 80 dB (decibel)
Machine weight : 2400 Kg
Machine colour : Beige RAL 7032. All contacts parts with the product are made in stainless steel AISI 304.

TF-60

TF-60

MACHINE DESCRIPTION

The containers fillers/capper model TF-60, is an alternate motion machine, designed to automatically feed, fill and close all kind of jars and cans with several kind of products.
The machine has an infeed rotating table which feeds and moves the containers to a conveyor and through a rotating star, up to the filling station.
In the filling station a dosing system, which can be by volume (cup dosers, drawer doser or auger doser), by weight (electronic scales) or for liquids, doses the product in the whished quantity.
After filling, the containers move to another star to the capping station, where the caps are fed and put on the containers.
After cap positioning, a specific device can screw or press the cap according to the closure type. After capping the filled and closed containers move on to a line discharge conveyor.
All functions are managed by a PLC and by a check panel located on the operator side of the machine.

TECHNICAL FEATURES

• All parts are stainless steel and PVC made
• Plexiglass top and side covers with magnetic safety interlocks
• Prewired electrical controls and operator panel according to IEC standards
• “No container – No product” device
• “CE” declaration

TECHNICAL SPECIFICATIONS

Production speed : up to
Installed power : 3 Kw
Electric Power : 380V-50HZ+N three phase
Air comsuption : 60 Nl/1’ (at 6 bars)
Net weight : 900 kg
Container dimensions : Min. Max.
Diam. 35 90
Height 50 200

GRN-20

GRN-20

MACHINE DESCRIPTION

The machine model GRN-20 is designed to form, fill and seal bags for all types of product in three-sides seals packaging style starting from a single reel of laminated or polyethylene film.
The main characteristic of this wrapper is to be completely mechanical driven by one cam that drives all sealing moves.
The absence of pneumatic drivers permit to reach high performances even with aggressive products and powders, avoiding long interventions stops.
In case of polyethylene film, the seals are obtained by an electromagnetic impulse system assembled on welding jaws, insulated with Teflon and cooled by water, controlled by new generation electronic cards, auto measured and self learning. A cooling device is available as option.
In case of laminating film the seals are obtained by two jaws: their temperature is controlled by thermocouples.
The configuration of the machine (for polyethylene film or laminating film) is chosen by the customer during the purchasing.
The motorized unwinder, controlled by a sensor on a rocker arm, helps the two drive belts placed on the frontal side of machine, and avoid straining too much the unwinding of the film.
An encoder, in case of continuous printed film, controls the bag length or in case printed film with spots a photocell, which reads a spot, printed directly on the film (as option) permit the correct centering of whatever image on the film.
A knife saw tooth shape, placed between the horizontal sealing jaws, cut the bags, mechanically, after sealing.
All the functions are managed by a PLC through an operator display placed on the front of the machine, storing the parameters of the different size part groups.

FEATURES

The machine is fully mechanic and driven by only one hardened steel cam.
Volumetric doser, auger filler and weighing devices are available as option depending on the product.
Motorized unwinder
Anti-powder filling tube (when needed)
Plexiglas top and side covers with magnetic safety interlocks.
Prewired electrical controls and operator panel according to I.E.C. standards.
CE declaration

SPECIFICATIONS

Installed power : 4,5 kw
Electric tension : 380V 50 Hz three-phase
Electric panel : 24 V
Net weight : 900 kg
Bags capacity : up to 28 liters
Bags dimensions : min. 130 x 200 mm max. 380 x 760 mm
Reel dimensions : max. diam. 450 mm max. width 850 mm
Colour : RAL 7035

GMP-50

GMP-50

MACHINE DESCRIPTION

The machine model GMP-50 is designed to form, fill and seal bags for all types of product in three-sides seals packaging style starting from a single reel of laminated or polyethylene film.
The main characteristic of this wrapper is to be completely mechanical driven by one cam that drives all sealing moves.
The absence of pneumatic drivers permit to reach high performances even with aggressive products and powders, avoiding long interventions stops.
In case of polyethylene film, the seals are obtained by an electromagnetic impulse system assembled on welding jaws, insulated with Teflon and cooled by water, controlled by new generation electronic cards, auto measured and self learning. A cooling device is available as option.
In case of laminating film the seals are obtained by two jaws: their temperature is controlled by thermocouples.
The configuration of the machine (for polyethylene film or laminating film) is chosen by the customer during the purchasing.
The motorized unwinder, controlled by a sensor on a rocker arm, helps the two drive belts placed on the frontal side of machine, and avoid straining too much the unwinding of the film.
An encoder, in case of continuous printed film, controls the bag length or in case printed film with spots a photocell, which reads a spot, printed directly on the film (as option) permit the correct centering of whatever image on the film.
A knife saw tooth shape, placed between the horizontal sealing jaws, cut the bags, mechanically, after sealing.
All the functions are managed by a PLC through an operator display placed on the front of the machine, storing the parameters of the different size part groups.

FEATURES

The machine is fully mechanic and driven by only one hardened steel cam.
Volumetric doser, auger filler and weighing devices are available as option depending on the product.
Motorized unwinder
Anti-powder filling tube (when needed)
Plexiglas top and side covers with magnetic safety interlocks.
Prewired electrical controls and operator panel according to I.E.C. standards.
CE declaration

TECHNICAL SPECIFICATIONS

Installed power: 4,5 kW
Electric tension. : 380V 50 Hz three-phase
Electric panel: 24 V
Net weight: 650 kg
Bags capacity: up to 3 litres
Bags dimensions: min. 60 x 80 mm max. 230 x 360 mm
Reel dimensions: max. diam. 300 mm max. Width 500 mm
Colour: RAL 7035